constitute the “ running rigging, ” since they are “in constant use, to trim yards, and make or shorten sail ” (Admiral Smyth, op. cit.). The rigging must also provide the crew with the means of going aloft, and with standing ground to do their work when aloft. Therefore the shrouds (see below) are utilized to form ladders of rope, of which the steps are called ratlines, by which the crew can mount. Near the heads of the lower masts are the tops-platforms on which men can stand-and in the same place on the topmasts are the “ cross trees, ” of which the main function is to extend the top gallant shrouds. The yards are provided with ropes, extending from the middle to the extremities or arms, called horses, or foo tropes, which hang about 2 or 3 ft. down, and on which

men can stand. The material of which the cordage is made has differed, and still differs greatly. Leather has been used. must be adapted to resist two kinds of pressure, the longitudinal, whether applied by the wind or by the motion of the vessel when pitching (Le. plunging head and stern alternately into the hollow of the sea), and the lateral, when the wind is blowing on the side and she is rolling. The longitudinal pressure is counteracted by the bobstays, stays and back stays. A reference to fig. 1 will show that the bobstays hold down the bowsprit, which is liable to be lifted by the tug of the ~jibs, and, of the stays connecting it with the fore-topmast. If the bowsprit is lifted the fore-topmast loses part of its support. In the case of a small vessel, the lifting of a bowsprit would wreck her whole system of rigging in an instant. If fig. 1' is followed from the bow to the mizzenmast, it will be seen that a succession of stays connect the masts with the hull of the ship or with one another. All pull together to resist pressure from

An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|EB1911 - Volume 23.djvu/356}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images.

FIG. 1.—The Spars and Rigging of a Frigate. References are not repeated for each mast where the names and functions are identical. I, bowsprit; 2, bobstays, three pairs; 3, spritsail-gaffs, projecting on each side of the bowsprit-the ropes at the extremities are jib-guys and flying jib-guys; 4, jib-boom; 5, martingale-stay, and below it the flying-jib martingale; 6, back-ropes; 7, flying jib-boom; 8, fore-royal stay, flying jib-stay and halliard's; 9, fore-top gallant-stay, jib-stay and halliard's; 10, two fore-topmast-stays and fore-topmast staysail halliard's; II, the foretop-bowlines, stopped into the top and two *fore-stays; 12, two fore-tacks; 13, fore-truck; 14, fore-royal mast, yard and lift; 15, top gallant mast, yard and lift; 16, fore-top mast, topsail-yard, lift and reef-tackle; 17, foretop, fore-lift, and topsail-sheet; 18, foremast and fore-shrouds, nine pairs; 19, fore sheets; 20, fore-gaff; 21, fore-topmast back stays and topsail tye; 22, royal and top gallant back stays; 23, fore-royal-braces and main-royal-stay; 24, fore-top gallant braces and main-top gallant-stay; 25, standing parts or fore-topsail-braces and main topmast-stays; 26, hauling parts of fore-topsail-braces and main-top-bowlines; 27, fore parts of fore-braces; 28, mainstays; 29, main-tacks; 30, main-truck; 31, main-royal-braces; 32, mizzen-royal-stay and mizzen-royal-braces; 33, main-top gallant braces and mizzen-top gallant-braces; 34, standing parts of main-topsail-braces and mizzen-topmast-stay; 35, mizzen-topsail braces; 36, hauling parts of main-topsail-braces, mizzen-top-bowlines and cross-jack-braces; 37, main-braces and mizzen stay; 38, standing part of peak halliard's; 39, vangs, similar on each gaff; 40, ensign staff; 41, spanker-boom; 42, quarter boat's davits; 43, one of the davit topping-lifts and wind-sail; 44, main-yard-tackle; 45, a bull-rope. During historic times, however, the prevailing materials have been hemp or esparto grass (M athrocloa, or Stipa tenacissima), and in recent days chain and wire. As the whole of the rigging is divided into standing and running, so a rope forming part of the rigging is divided into the “ standing part ” and the “ fall.” The standing part is that which is made fast to the mast, deck or block. The fall is the loose end or part on which the crew haul. The block is the pulley through which the rope runs. “ Standing” in sea language means “ fixed ”-thus the T standing part of a hook is that which “ is attached to block, chain or anything which is to heave the hook up, with a weight hanging to it; the part opposite the point ” (Smyth, sub voce). “ Tackle ” is the combination of ropes and blocks; the combination of cables and anchors constitutes the “ ground tackle.” The function of all cordage may be said to be to pull, for the purpose either of keeping the masts in their places, or of moving spars and sails. The standing rigging which supports the masts in front. Pressure from behind is met by the back stays, which connect the topmasts and top gallant masts with the sides of the vessel. Lateral pressure is met by the shrouds and breastbackstays. A temporary or “ prev enter ” backstay is used

when great pressure is to be met. Seamen have at all times had recourse to special devices to meet particular dangers. When Dundonald, then captain of the "' Pallas ” frigate, was chased by a French squadron in stormy weather, he fortified his masts by ordering “ all the hawsers " (large ropes a little less strong than the cables which hold the anchor) “ in the ship to be got up to the mast heads, and hove taut, ” i.e. made fast to the side. Thus she was able to carry more sail than would have been possible with her normal rigging. The running rigging by which all spars and sails are hoisted, or lowered and spread or taken in, may be divided into those which lift and lowerthe lifts, jeers, halliard's (haul yards)-and those which hold down the lower corners of the sails-the tacks and sheets. 'A